FABERTEC L2 CO2 LASER CUTTER AND ENGRAVER
LARGE FORMAT 1300x2500 / 1500x3000
FABERTEC L2 1325 150WATT - £8,900.00 + VAT
FABERTEC L2 1530 150WATT - £10,100.00 + VAT
FABERTEC CO2 LASER CUTTERS COMES ALWAYS WITH RECI CO2
TUBES - A LEADER IN CO2 LASER TUBES TECHNOLOGY PROMISING
UP TO 10,000 HOURS LIFESPAN!
|
When the large format sheets of plexiglass, acrylics, fabrics, foam and other materials needs to be laser engraved or cut, we would advice to invest in our large format laser cutters FABERTEC L2. They come in two standard sizes 1300 x 2500mm and 1500 x 3000mm.
For larger sizes CO2 CNCs it is safer to go for a higher output lasers starting from 130Watt or even 150Watt. This is due to what we assume continuous production processes during the day hence to maximise lifespan of the CO2 tubes it is advisable to use lowest possible percentage of the laser power. |
Fabertec L1 and L2 CO2 lasers are very easy to operate. A typical operator can be up and ready in literally 1 hour after delivery and installation.
After connecting PC by USB to the L1 or L2 laser the software is ready to work with the laser cutter straightaway.
The only options which operators need to familiarise themselves in laser cutting, is percentage power of the laser and speed of laser head above the material. That is why it is quite easy to start with accurate cutting or engraving after 30-60min of testing particular clients materials and thicknesses.
After connecting PC by USB to the L1 or L2 laser the software is ready to work with the laser cutter straightaway.
The only options which operators need to familiarise themselves in laser cutting, is percentage power of the laser and speed of laser head above the material. That is why it is quite easy to start with accurate cutting or engraving after 30-60min of testing particular clients materials and thicknesses.