FABERTEC  M0  CNC  CENTRE

Fabertec M0 CNC Router is a modern machine designed to still present the same cutting ability as higher models like M1 but in much more affordable price.
​
If you looking precision machining of materials such as wood, chipboard, MDF, OSB, plastics, Plexiglas, PVC, HPL, composites (Corian, ​Hi-Macs, Betacryl etc), dibond, carbon, alucobond look
no further.

This state of the art milling machine is made of thick mild steel sections which provides high rigidity and resistance to overload, and provides excellent resonance dampening. The machine is equipped with an intuitive interface having advanced features.  

M0 CNC machining center is working in full 3D - you can use it to perform a complete machining in 3 axes for example nesting, drilling, carving etc.
​
Plotter comes with a modern CAD/CAM program. Our milling plotter software is equipped with functions like: autonesting, automatic correction of the cutter diameter, slope entry into the material,  define bridges, automated cutting first internal shapes, visualisation, 3D routing tool path and others. 

VERY  AFFORDABLE  PRICES  TO  ALLOW  YOU  TO  SPEED  UP  YOUR  WORKSHOP  PROCESSES:
​
FABERTEC M0 1325 - 1300X2500 - £10,900.00 + VAT
FABERTEC  M0  1530  -  1500X3000  -  £12,900.00 + VAT
FABERTEC  M0  2030  -  2000X3000  -  £14,900.00 + VAT
​

HIRE  PURCHASE  FROM  AS  LOW  AS  £56.00  PER  WEEK!

FABERTEC  M0  2030  MODEL

SOME  OF  THE  IMPORTANT  FEATURES  OF 
THE  ​FABERTEC  M0  CNC  CENTRE

VACUUM TABLE WITH AIR COOLED VACUUM PUMP
T- SLOTS INCLUDED AS STANDARD

Quick and efficient work by holding your work piece/board in place by vacuum suction. No need to clamp boards in place saving a lot of operator time.
​
The vacuum pumps supplied by us  are always air cooled. The cheapest ones are water cooled and operator has to remember to keep the tank full, use antifreezers in winter, make sure no liquid is left in system during winter if antifreeze not used.
INDUSTRIAL SPINDLES HQD 6kW

ALWAYS AIR COOLED
(Except if very high kW used by Italian HSD)

HQD PRODUCTS ARE BASED ON FAMOUS ITALIAN MANUFACTURER HSD HITECO

One of the best spindles used around the world. Very efficient, quiet and what's most important, very affordable.
STRONG 5A STEPPER MOTORS

Stepper motors are a more affordable way of driving your CNC instead of servo motors like in M1 and M2 models.
They may be slower than servos, but they are still powerful enough to move heavy gantry and strong spindle through
​the thickest of the materials.
CENTRALISED LUBRICATION

The lubrication oil for all guides/runners is located in automatic pump tank. After set amount of minutes it will lubricate all guides and runners.

By working with machines with manual lubrication we know it was a huge waste of time
​of the operator hence this option was added ​as standard. 
WEINHONG DSP NK105 G3 CONTROLLER

Very intuitive, simple to learn controller. Literally 2 hours training and you can start nesting/drilling/engraving etc - easy as it goes.

More physical buttons available than in G2 model which will allow you to quickly access operations.
INDUSTRIAL TRAPEZOIDAL RAILS 25

Designed for 1700kg of dynamic load on the gantry - The whole CNC weights 1200kg so don't worry about any vibrations or movements.
​300MM HIGH Z AXIS / GANTY OPENING

For those operations where you need long tool for high elements. 300mm clearance will allow you to even use external vacuum pods (on our other auctions) and route edge of material or even underneath it using proper tooling.
HEAVY DUTY  BASE/BED/GANTRY 

All fixing surfaces are milled by 100 ton huge industrial
​CNC machines to make sure every fixing surface is perfectly aligned, square and true.
EXTRA LIGHT

Always needed in setting, zeroing, changing tool etc. You have a LED light on
​an adjustable arm close to the spindle, to always have this extra sheen when needed. VERY handy as we noticed over the years for using CNCs for our
joinery products.


CNC come fully assembled from our UK workshop (1325 version. The 2x3 meters needs gantry installation at the clients premises). Just levelling, double checks and ready to work.

Full 12 months UK firm Warranty plus another 12 months online/phone support.

FEATURES OF M1 CNC ROUTER

TECHNICAL  SPECIFICATION  FABERTEC  M1  1325  UPGRADED  CNC  MACHINING  CENTRE:


Working Surface: 1300 x 2500mm (Other sizes like 2000 x 3000, 1500 x 3000, 700 x 2500 etc available)

Max Working Height: Axis Z 300 mm 

Motors: SERVO 850W with BRAKES X, Y,  Ball screw Axis Z

Linear Bearings: Trapezoidal Tracks 

Speed: 40m/min

Software Resolution: 0,01mm

Positioning Accuracy: physical 0,05mm

X Gate Double Motors: Yes

Spindle: 6kW HQD AIR COOLED 

Spindle RPMU: up to 18000 RPM

Brushless Spindle: Yes

Spindle Tool Diameter: From 1mm to 20mm

Router Bed: Always as standard vacuum bed with T-Slots. Air cooled vacuum pump included.

Weight: 1300 kg (1325 Model)

External Dimensions: 2200 x 3300mm

Power Supply: 415 V 3 Phase 50Hz