FABERTEC FL 4 FIBER LASER
2 retractable tables, fully walled for safety
For over 20-30 years since mass produced fiber lasers appeared in metal fabricators workshops
the entry price for those machines was insanely high as it happens with all new technologies.
Just 10 years ago the 1kW entry model from TRUMPF, AMADA or BYSTRONIC would set you
€200-300k. As the technology moved forward and lots of firms started to invest in fiber source manufacturing facilities the cost of parts starts to drop quite significantly even to a point where metal fabricator can start with rapid metal cutting FABERTEC FL2 1kW for only £36k+VAT.
It was never so easy to enter into the metal cutting market as it is at the moment, with more high powered fiber lasers costing less than £100k, but allowing you to cut 15-25mm mild steel or
15mm stainless steel, not to mention aluminium, brass or copper.
As with every FABERTEC machine we offer a full package with clear pricing without any hidden extras. All our prices include delivery on curtain lorry, whole setup package, software, installation and training. We believe in transparency and quick turnover as we know from past experience as fabricators you do not have time and patience for lengthy quotations, small variations or extras which very often can rise the price by even 50%.
The important factor in choosing a fiber laser cutting machine is that it is almost maintenance and parts free. Most of the laser sources last up to 100,000 hours without the need of calibrating and renewing generators and the only spares used are lenses/lens protectors, nozzles and they do
not cost a fortune.
Fiber Lasers for metal cutting are really a no brainer solution for companies which want to produce thousands of parts in literally a few days.
the entry price for those machines was insanely high as it happens with all new technologies.
Just 10 years ago the 1kW entry model from TRUMPF, AMADA or BYSTRONIC would set you
€200-300k. As the technology moved forward and lots of firms started to invest in fiber source manufacturing facilities the cost of parts starts to drop quite significantly even to a point where metal fabricator can start with rapid metal cutting FABERTEC FL2 1kW for only £36k+VAT.
It was never so easy to enter into the metal cutting market as it is at the moment, with more high powered fiber lasers costing less than £100k, but allowing you to cut 15-25mm mild steel or
15mm stainless steel, not to mention aluminium, brass or copper.
As with every FABERTEC machine we offer a full package with clear pricing without any hidden extras. All our prices include delivery on curtain lorry, whole setup package, software, installation and training. We believe in transparency and quick turnover as we know from past experience as fabricators you do not have time and patience for lengthy quotations, small variations or extras which very often can rise the price by even 50%.
The important factor in choosing a fiber laser cutting machine is that it is almost maintenance and parts free. Most of the laser sources last up to 100,000 hours without the need of calibrating and renewing generators and the only spares used are lenses/lens protectors, nozzles and they do
not cost a fortune.
Fiber Lasers for metal cutting are really a no brainer solution for companies which want to produce thousands of parts in literally a few days.
STARTING FROM £70k+VAT 2kW 1530
FL4 1530
FL4 is made to streamline your operations and contain metal particles in an enclosed area.
Also, it comes as standard in the minimum 1500 x 3000mm table size and is fitted with 2 tables
on a conveyor system.
This allows the operator to cut on one table where the 2nd is retracted to rear of the machine allowing for easy parts clearing and loading new sheet by forklift, or magnetic or clamp crane.
Also by keeping the laser operations enclosed you can position FL4 anywhere in the workshop
not worrying about covering or building partitions like with FL2. We highly recommend to invest
in one of the metal dust extractors when you choosing FL4.
Fiber lasers are used to cut carbon steel, stainless steel, aluminium, brass and copper.
The thickness of the material dictates what fiber laser power you should use.
The most affordable 1kW lasers can cut up to 6-7mm mild steel. By upgrading the laser power you can not only cut thicker materials, but also increase speed of your operations on thinner materials as the laser head will move much quicker with a more powerful beam.
To get the most of your fiber laser investment you should use gas assisted cutting, as this will greatly improve (or in some cases even allow to cut) your edge finish and lack of dross.
For cutting highly reflective metals like brass, copper, aluminium, we strongly recommend IPG
laser source instead of budget Raycus.
IPG Laser source is a German made supplier with most innovative solutions when it comes to phototronics. IPG laser source is also equipped with back light protection which is essential when cutting highly reflective materials like aluminium, brass, copper, stainless steel - the reflection of the laser during the cutting can damage the resonator which will greatly reduce lifespan of your laser. If you planning to cut above materials on daily basis we strongly suggest to choose IPG laser source for peace of mind.
Also, it comes as standard in the minimum 1500 x 3000mm table size and is fitted with 2 tables
on a conveyor system.
This allows the operator to cut on one table where the 2nd is retracted to rear of the machine allowing for easy parts clearing and loading new sheet by forklift, or magnetic or clamp crane.
Also by keeping the laser operations enclosed you can position FL4 anywhere in the workshop
not worrying about covering or building partitions like with FL2. We highly recommend to invest
in one of the metal dust extractors when you choosing FL4.
Fiber lasers are used to cut carbon steel, stainless steel, aluminium, brass and copper.
The thickness of the material dictates what fiber laser power you should use.
The most affordable 1kW lasers can cut up to 6-7mm mild steel. By upgrading the laser power you can not only cut thicker materials, but also increase speed of your operations on thinner materials as the laser head will move much quicker with a more powerful beam.
To get the most of your fiber laser investment you should use gas assisted cutting, as this will greatly improve (or in some cases even allow to cut) your edge finish and lack of dross.
For cutting highly reflective metals like brass, copper, aluminium, we strongly recommend IPG
laser source instead of budget Raycus.
IPG Laser source is a German made supplier with most innovative solutions when it comes to phototronics. IPG laser source is also equipped with back light protection which is essential when cutting highly reflective materials like aluminium, brass, copper, stainless steel - the reflection of the laser during the cutting can damage the resonator which will greatly reduce lifespan of your laser. If you planning to cut above materials on daily basis we strongly suggest to choose IPG laser source for peace of mind.
LASER POWER1kW
2kW 3kW 4kW 6kW |
MILD STEEL8mm
16mm 20mm 22mm 25mm |
STAINLESS STEEL4mm
6mm 8mm 10mm 18mm |
ALUMINIUM4mm
6mm 8mm 10mm 18mm |
BRASS/COPPER2mm
4mm 5mm 6mm 10mm |
• The cutting quality and maximum thickness depends on air/gas quality, lenses, material reflection, humidity.
•• Cutting without O2/Nitrogen assisted gas will greatly decrease lifespan of laser source, lenses and consumables.
•• Cutting without O2/Nitrogen assisted gas will greatly decrease lifespan of laser source, lenses and consumables.
2KW MAX/RAYCUS LASER SOURCE AUTOMATIC FOCUS
MODELFABERTEC FL4 1530 2kW Max/Raycus
FABERTEC FL4 2030 2kW Max/Raycus FABERTEC FL4 2040 2kW Max/Raycus FABERTEC FL4 2060 2kW Max/Raycus |
TABLE DIMENSIONS1500 x 3000mm (2 tables)
2000 x 3000mm (2 tables) 2000 x 4000mm (2 tables) 2000 x 6000mm (2 tables) |
PRICE£70,000 +VAT
£82,000 +VAT £90,000 +VAT £115,000 +VAT |
FOR HIGHER POWER ADD BELOW PRICE TO TABLE SIZE FROM ABOVE
Example: FABERTEC FL4 1530 2kW Max/Raycus £70,000 + 2kW IPG German Source £12,000 = £82,000 +VAT
LASER UPGRADE EXTRA IPG GERMAN SOURCE
|
|
2kW IPG German Source
3kW IPG German Source 4kW IPG German Source 6kW IPG German Source |
£14,000 +VAT
£24,000 +VAT £40,000 +VAT £72,000 +VAT |
LASER POWER UPGRADE EXTRA AUTO FOCUS
|
3kW Max/Raycus Laser
4kW Max/Raycus Laser 6kW Max/Raycus Laser |
£12,000 +VAT
£23,000 +VAT £34,000 +VAT |
Metal Dust Extractor Filtered 3kw £5,500 +VAT
Metal Dust Extractor Filtered 5.5kw £9,000 +VAT
Metal Dust Extractor Filtered 5.5kw £9,000 +VAT
TECHNICAL SPECIFICATION
FABERTEC FL 4 FIBER LASER:
|
Max/Raycus or German IPG laser source – advertised manufacturers fiber laser lifespan
up to 100,000 hours – equivalent of 10h daily cutting for 27 years! Structure fully welded and heat destressed
Full servo motors Fuji or Yaskawa installed
Speeds up to 80 meters per minute
Aluminium reinforced gantry for higher speeds
Hiwin runners with automatic lubrication
Automatic height adjustment – laser heads follows sheet height on the table
Automatic calibration – the controller automatically checks laser settings
Large monitor with Cypcut software
Handheld wireless control panel
Draw, adjust, import DXF/PDF, create lead
in/out – all straight from the machine Two separate inlets for oxygen/nitrogen controlled by electric valves
Automatic focus of laser head from software
|
Supplied with array of nozzles, protective lenses, spares
Runners and linear gear protection against
laser and sparks possible damage Drawers underneath the table for offcuts/parts
Two automatic tables installed
Supplied with powerful chiller also with the heating option – in case workshop temperature goes below 0 to prevent damage from water freezing
Optional fume extractors with fire protection
to keep warehouse free from metal dust UP TO 5 YEAR
|