FABERTEC PL2 PLASMA CUTTER
FABERTEC PL2 CNC Plasma Centre was developed with metal fabricators in mind. Ease of use, repeatability, durable construction and a really affordable price allows even a one man band company to invest in a plasma cutting machine to increase their profitability to a new level.
When thinking about CNC plasma cutters, you have to remember that they are made from two parts – a CNC controlled table and plasma source which is attached to Z axis of the CNC machine. The CNC plasma table and source is always matched with client operations in mind. For example if your company is cutting all the time 2-3mm mild steel we would not offer an expensive 85 or 105amp plasma source, except if they need to speed up cutting process.
That is why we always try to understand the client production, so not to over sale, but to propose the most affordable machine for your particular usage.
When thinking about CNC plasma cutters, you have to remember that they are made from two parts – a CNC controlled table and plasma source which is attached to Z axis of the CNC machine. The CNC plasma table and source is always matched with client operations in mind. For example if your company is cutting all the time 2-3mm mild steel we would not offer an expensive 85 or 105amp plasma source, except if they need to speed up cutting process.
That is why we always try to understand the client production, so not to over sale, but to propose the most affordable machine for your particular usage.
Collision Detection System – Machine will detect any raised metal section and stops cutting to prevent damaging the plasma torch
Heavy Duty Construction – Up to 900kg sheets can be laid on the table
Torch Height Control (THC) – In case sheets will be warped the torch will follow unevenness without hitting it
LCD Controller – Very easy to operate controller with plenty of ready made shapes, flanges, and stiffeners for adhoc cuts
Strong Stepper Motors – Speeds of up to 15m/min
Central Lubrication System – Automatically lubricate all runners
Harmonica Covers – Preventing damage from sparks on the exposed rails
Heavy Duty Construction – Up to 900kg sheets can be laid on the table
Torch Height Control (THC) – In case sheets will be warped the torch will follow unevenness without hitting it
LCD Controller – Very easy to operate controller with plenty of ready made shapes, flanges, and stiffeners for adhoc cuts
Strong Stepper Motors – Speeds of up to 15m/min
Central Lubrication System – Automatically lubricate all runners
Harmonica Covers – Preventing damage from sparks on the exposed rails
modelFABERTEC PL2 1325 PLASMA CUTTER
|
price£9,800 +VAT
|
HYPERTHERM MILD STEEL STAINLESS STEEL ALUMINIUM SPEED
Powermax 45 XP 12mm 12mm 12mm Approx 700mm/min
Powermax 65 XP 16mm 16mm 16mm Approx 560mm/min
Powermax 85 XP 20mm 20mm 20mm Approx 580mm/min
Powermax 105 XP 22mm 22mm 22mm Approx 790mm/min
Powermax 125 XP 25mm 25mm 25mm Approx 940mm/min
Powermax 45 XP 12mm 12mm 12mm Approx 700mm/min
Powermax 65 XP 16mm 16mm 16mm Approx 560mm/min
Powermax 85 XP 20mm 20mm 20mm Approx 580mm/min
Powermax 105 XP 22mm 22mm 22mm Approx 790mm/min
Powermax 125 XP 25mm 25mm 25mm Approx 940mm/min
All above maximum cutting thicknesses are greater than stated. Table shows maximum piercing thickness on mechanised CNC table
with torch height control.
If 16mm will be cut on a daily basis, we strongly suggest to invest in higher model 85 XP or 105 XP to have a much better quality edge.
with torch height control.
If 16mm will be cut on a daily basis, we strongly suggest to invest in higher model 85 XP or 105 XP to have a much better quality edge.